To place an order, scroll down and enter quantities in the multi-add grid and click "add selected to cart". For product details, select any SKU or size and click the Description and Specifications tabs. Scroll to the bottom for related items.
Sleeve Anchors, Phillips/Flat Head, Zinc Plated Steel, 3/8"-16 x 4"
Diameter: 3/8"
| Quantity | Unit price |
|---|---|
| 1 – 99 |
$1.40*
|
| 100 – 999 |
$1.23*
|
| 1000+ |
$1.05*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 3/8"
- Drill (Hole) Size: 3/8"
- Drive Style: Phillips Slotted Combo
- Head Type: Flat Head
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Head Height: Max 0.161 - Min 0.156
- Head Diameter: 0.700"
- Head Style: Flat
- Length: 4"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Part Number: 3661114112606
- Pattern: Flat Head Sleeve Anchor
- Product Type: Sleeve Anchor
- Size: 3/8" x 4"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: 3/8"
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
3/8" Zinc Plated Phillips / Flat Head Sleeve Anchors
- Phillips/Slotted head combo allows for installation with a Phillips or flat head screwdriver
- 360 degree expansion provides consistent and reliable holding values in a wide range of base materials
- Pre-assembled and ready to install; no need to purchase bolts, nuts, and washers separately for a convenient application process
- Anchor size matches recommended drill bit size for simple, fast installation and consistent optimal results
- Zinc plated carbon steel construction suitable for most dry environment applications
3/8" Zinc Plated Phillips / Flat Head Sleeve Anchors, also known as 3/8 Flat Phillips Sleeve Anchors Zinc Plated, are versatile expanding anchors designed for medium to heavy-duty fastening in concrete, block, brick, and stone. The combination Phillips/slotted head allows for installation with either a Phillips head or flat head screwdriver.
To install these 3/8" Phillips flat head sleeve anchors, drill the recommended 3/8" diameter pilot hole, insert the anchor through the fixture and into the base material, then tighten the head to expand the outer sleeve for a secure hold. Zinc plating on the 3/8" carbon steel sleeve anchor provides good corrosion resistance for use in most dry interior applications. For maximum corrosion resistance, consider hot dipped galvanized or stainless steel options.
3/8 Flat Phillips Sleeve Anchor Zinc Plated anchors are commonly used for securing:
- Electrical panels, disconnect switches, and transformers
- Water and gas pipes
- Cable trays and bus ducts
- HVAC equipment
- Shelving and racks
- Elevator guide rails
- Steel stairways and catwalks
Available Sizes:
- 3/8" x 2-3/4" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 4" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 5" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 6" Zinc Plated Phillips / Flat Head Sleeve Anchor
Choose the 3/8" zinc plated sleeve anchor length to suit your fixture thickness and base material while ensuring minimum embedment requirements are met. These 3/8" Phillips flat head sleeve anchors provide a reliable, easy-to-install solution for a variety of medium to heavy-duty anchoring applications in concrete and masonry.