Sleeve Anchors, Phillips/Flat Head, Zinc Plated Steel, 3/8" x 4"
Diameter: 3/8"
| Quantity | Unit price |
|---|---|
| To 99 |
$1.40*
|
| To 999 |
$1.23*
|
| From 1000 |
$1.05*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 3/8"
- Drill (Hole) Size: 3/8"
- Drive Style: Phillips Slotted Combo
- Head Type: Flat Head
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Head Height: Max 0.161 - Min 0.156
- Head Diameter: 0.700"
- Head Style: Flat
- Length: 4"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Part Number: 3661114112606
- Pattern: Flat Head Sleeve Anchor
- Product Type: Sleeve Anchor
- Size: 3/8" x 4"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: 3/8"
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
3/8" Zinc Plated Phillips / Flat Head Sleeve Anchors
- Phillips/Slotted head combo allows for installation with a Phillips or flat head screwdriver
- 360 degree expansion provides consistent and reliable holding values in a wide range of base materials
- Pre-assembled and ready to install; no need to purchase bolts, nuts, and washers separately for a convenient application process
- Anchor size matches recommended drill bit size for simple, fast installation and consistent optimal results
- Zinc plated carbon steel construction suitable for most dry environment applications
3/8" Zinc Plated Phillips / Flat Head Sleeve Anchors, also known as 3/8 Flat Phillips Sleeve Anchors Zinc Plated, are versatile expanding anchors designed for medium to heavy-duty fastening in concrete, block, brick, and stone. The combination Phillips/slotted head allows for installation with either a Phillips head or flat head screwdriver.
To install these 3/8" Phillips flat head sleeve anchors, drill the recommended 3/8" diameter pilot hole, insert the anchor through the fixture and into the base material, then tighten the head to expand the outer sleeve for a secure hold. Zinc plating on the 3/8" carbon steel sleeve anchor provides good corrosion resistance for use in most dry interior applications. For maximum corrosion resistance, consider hot dipped galvanized or stainless steel options.
3/8 Flat Phillips Sleeve Anchor Zinc Plated anchors are commonly used for securing:
- Electrical panels, disconnect switches, and transformers
- Water and gas pipes
- Cable trays and bus ducts
- HVAC equipment
- Shelving and racks
- Elevator guide rails
- Steel stairways and catwalks
Available Sizes:
- 3/8" x 2-3/4" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 4" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 5" Zinc Plated Phillips / Flat Head Sleeve Anchor
- 3/8" x 6" Zinc Plated Phillips / Flat Head Sleeve Anchor
Choose the 3/8" zinc plated sleeve anchor length to suit your fixture thickness and base material while ensuring minimum embedment requirements are met. These 3/8" Phillips flat head sleeve anchors provide a reliable, easy-to-install solution for a variety of medium to heavy-duty anchoring applications in concrete and masonry.
Frequently Used With
