Flat Washers, Aluminum, #10
Standard Round Washers in 2024-T4 Aluminum Alloy
| Quantity | Unit price |
|---|---|
| To 99 |
$0.12*
|
| To 999 |
$0.06*
|
| From 1000 |
$0.05*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: #10
- Material (Duplicate): Aluminum 2024-T4
- Material: Aluminum
- Outside Diameter (OD): 0.437
- Part Number: 793244333002
- Pattern: Standard Flat Washer
- Product Type: Flat Washers
- Size: #10
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
An aluminum, or aluminium, flat washer is a round outer diameter thin plate with a center hole (inner diameter) punched to the size of the bolt or screw diameter.
- Used to distribute fastener pressure evenly
- Can act as a flat surface area for nut or bolt to tighten against
- Washer Specifications may vary +/- .007 depending on production run
- IFI Tolerances Apply
Aluminum flat washers are corrosion resistant, lightweight, and non-magnetic. Our aluminum washers are made of 2024-T4 Aluminum Alloy which is a high strength aluminum alloy with good fatigue resistence and strength-to-weight ratio. Note that, while aluminum 2024-T4 is resistant to atmospheric corrosion, it is not as corrosive resistant as stainless steel and is ill suited for marine enviroments.
Important: We recommend not mixing metals; aluminum fasteners should be used with aluminum fasteners. For more information, please read our article on the subject HERE.
_x000D_
_x000D_
_x000D_
_x000D_
Flat Washer Sizes_x000D_
_x000D_
_x000D_
Inner Diameter (ID)_x000D_
_x000D_
_x000D_
Outer Diameter (OD)_x000D_
_x000D_
_x000D_
Washer Thickness_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
#6_x000D_
_x000D_
_x000D_
0.149"_x000D_
_x000D_
_x000D_
0.375"_x000D_
_x000D_
_x000D_
0.031"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
#8_x000D_
_x000D_
_x000D_
0.174"_x000D_
_x000D_
_x000D_
0.375"_x000D_
_x000D_
_x000D_
0.031"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
#10_x000D_
_x000D_
_x000D_
0.203"_x000D_
_x000D_
_x000D_
0.437"_x000D_
_x000D_
_x000D_
0.031"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
1/4"_x000D_
_x000D_
_x000D_
0.265"_x000D_
_x000D_
_x000D_
0.687"_x000D_
_x000D_
_x000D_
0.045"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
5/16"_x000D_
_x000D_
_x000D_
0.343"_x000D_
_x000D_
_x000D_
0.750"_x000D_
_x000D_
_x000D_
0.062"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
3/8"_x000D_
_x000D_
_x000D_
0.406"_x000D_
_x000D_
_x000D_
0.875"_x000D_
_x000D_
_x000D_
0.062"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
1/2"_x000D_
_x000D_
_x000D_
0.562"_x000D_
_x000D_
_x000D_
1.250"_x000D_
_x000D_
_x000D_
0.078"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
5/8"_x000D_
_x000D_
_x000D_
0.687"_x000D_
_x000D_
_x000D_
1.500"_x000D_
_x000D_
_x000D_
0.078"_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
3/4"_x000D_
_x000D_
_x000D_
0.812"_x000D_
_x000D_
_x000D_
1.875"_x000D_
_x000D_
_x000D_
0.091"_x000D_
_x000D_
_x000D_
_x000D_
Product number:
1000-106-006
