Sheet Metal Screws, Phillips Truss Head, Stainless Steel 18-8, #14 x 5/8"
Diameter - Thread Pitch: #14-10
| Quantity | Unit price |
|---|---|
| To 99 |
$0.23*
|
| To 999 |
$0.15*
|
| From 1000 |
$0.13*
|
- ANSI: ANSI B18.6.4
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #14
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Truss Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 18-8
- Hardness: 100 Rockwell B
- Head Height Max: 0.15
- Head Diameter: Max 0.573 - Min 0.546
- Head Style: Truss
- Length: 5/8"
- Material: Stainless Steel
- Overall Head Height: Max 0.150 - Min 0.133
- Part Number: 717029131034
- Phillips Drive: #3
- Point Type: A
- Product Type: Sheet Metal Screws
- Reduction: 0.4
- Size Type: Regular
- Standards Met: ANSI B18.6.4
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000 PSI
- Thread Diameter Major: (#14) 0.254" - 0.248"
- Thread Diameter Minor: (#14) 0.185" - 0.178"
- Thread Direction: Right Hand
- Thread Pitch: 10 Per Inch
- Thread Size: #14
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Yield PSI: 55,000 - 75,000 PSI
- #14-10
- Sharp cutting threads that cut into material for better retention
- Fully Threaded
- Excellent for attaching metal hardware to wood
- 18-8 Stainless steel Phillips truss head sheet metal screws are corrosion resistant
- Suitable for fresh water moisture environments
- Most commonly used for:
- Sheet Metal
- Wood
- Plastic
- Sizes listed below as: Diameter - Thread Pitch
Product number:
3570012
Skip product gallery
Lock Washers, Split Ring, Stainless Steel 304, 1/4" (.252 ID x .487 OD x .062 Thick)
From
$0.03*
Subscription
Flat Washers, Stainless Steel 304, 1/4" (.281 ID x 5/8 OD x .050 Thick)
From
$0.02*
Subscription
Frequently Used With
Size:
1/4"
Size:
1/4"
