Machine Screws, Phillips Truss Head, Stainless Steel 316, 1/4"-20 x 5/8"
Diameter - Thread Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.45*
|
| To 999 |
$0.39*
|
| From 1000 |
$0.36*
|
- ANSI: ANSI B18.6.3
- Class: 2A
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: 1/4"
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Truss Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Grade: 316
- Hardness: 100 Rockwell B
- Head Height Max: 0.15
- Head Diameter: Max 0.573 - Min 0.546
- Head Style: Truss
- Length: 5/8"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.150 - Min 0.133
- Phillips Drive: #3
- Product Type: Machine Screws
- Reduction: 0.4
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Yield PSI: 55,000 - 75,000 PSI
- Truss Head: Over-sized head with undercut bottom and low profile domed top
- A machine screw is commonly identified by its small size
- Lower profile than pan head screws
- Distributes the force of the screw over a wider surface area
- 316 Stainless steel Phillips head machine screws are rust and corrosion resistant in applications exposed to freshwater moisture
1/4"-20 Phillips truss head machine screws are available in marine grade 316 stainless steel.
Product number:
5104-012-006
Skip product gallery
Flat Washers, Stainless Steel 316, 1/4" (0.281 ID x 5/8 OD x .050 THK)
From
$0.06*
Subscription
Hex Finish Nuts, Stainless Steel 316, 1/4"-20 (7/16" Flats x 7/32" Thick)
From
$0.05*
Subscription
Nylon Lock Nuts, Stainless Steel 316, 1/4"-20 (439" Flats x .328" Thick)
From
$0.16*
Subscription
Frequently Used With
Size:
1/4"
Size:
1/4"-20
Size:
1/4"-20
