Nylon Lock Nuts, Stainless Steel 304, 9/16-12 (.877 Flats x .656 Height)
Lock Nut with a Nylon Insert in Corrosion Resistant 304 Stainless Steel
| Quantity | Unit price |
|---|---|
| To 99 |
$2.47*
|
| To 999 |
$1.72*
|
| From 1000 |
$1.54*
|
- Across Flats (Width): .877"
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 9/16"
- Drive Style: External Hex
- Thread Direction: Right Hand
- Fit: 2B
- Grade: 304
- Internal Thread: 9/16/2012
- Material: Stainless Steel
- Part Number: 720572167177
- Product Type: Nylon Insert Lock Nut
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 12 Per Inch
- Thread Size: 9/16"-12
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
|
|
|
To prevent or stop galling (also known as seizing or locking-up) on stainless steel fasteners, we recommend using an anti-seize thread lubricant from our line of
MRO Solutions
Stainless Steel fasteners rubbing against each other (during installation) may cause a reaction known as Galling. The chance of galling increases significantly when a nylon insert is added to the nut. To limit the extra friction created by the nylon insert, Waxed Nylon Insert Lock Nuts are also available.
*Even when using Waxed Nylon Insert Lock Nuts, we still recommend using an MRO Anti-Seize Solution to further deter thread galling during any stainless steel fastener installation.
