Nylon Hex Jam Lock Nuts, Zinc Plated Steel, Grade A #8-36 UNF
Zinc Plated Hex Jam Nuts with a Nylon Insert
| Quantity | Unit price |
|---|---|
| To 99 |
$0.08*
|
| To 999 |
$0.04*
|
| From 1000 |
$0.03*
|
- Across Flats (Width): Max 0.345 - Min 0.336
- Color: SIlver
- Condition: New
- Diameter: #8
- Drive Style: External Hex
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Fit: 2B
- Grade: A
- Internal Thread: #8-36
- Material: Steel
- Part Number: 722703785236
- Product Type: Nylon Insert Jam Nut
- Size System: US
- Size Type: Regular
- Standards Met: REACH, RoHS
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 36 Per Inch
- Thread Size: #8-36
- Thread Standard: UNF
- Thread Type: Fine
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
A Nylon Insert Hex Jam Nut, sometimes called a Nylon Jam Nut or Nylon Jam Lock Nut, is a low profile lock nut used for fastening to a bolt when mechanically joining materials together. The nylon material located at the top of the nut prevent loosening from vibration.
Nylon jam nuts in this selection are in case-hardened (CR+3) Zinc Plated Grade A Steel. This adds a layer of protection to the fastener and increases its durability.
Sizes Below Listed As:
Internal Diameter - Thread Pitch
| Nut Size | Width Across Flats | Thickness |
| #4 | Max 0.251 - Min 0.243 | Max 0.124 - Min 0.094 |
| #6 | Max 0.313 - Min 0.305 | Max 0.140 - Min 0.110 |
| #8 | Max 0.345 - Min 0.336 | Max 0.187 - Min 0.157 |
| #10 | Max 0.376 - Min 0.367 | Max 0.187 - Min 0.157 |
| 1/4" | Max 0.439 - Min 0.430 | Max 0.218 - Min 0.188 |
| 5/16" | Max 0.502 - Min 0.492 | Max 0.265 - Min 0.235 |
| 3/8" | Max 0.564 - Min 0.553 | Max 0.281 - Min 0.251 |
| 7/16" | Max 0.627 - Min 0.615 | Max 0.328 - Min 0.298 |
| 1/2" | Max 0.752 - Min 0.741 | Max 0.328 - Min 0.298 |
| 9/16" | Max 0.877 - Min 0.865 | Max 0.374 - Min 0.344 |
| 5/8" | Max 0.940 - Min 0.928 | Max 0.406 - Min 0.376 |
| 3/4" | Max 1.064 - Min 1.052 | Max 0.421 - Min 0.391 |
| 7/8" | Max 1.252 - Min 1.239 | Max 0.484 - Min 0.454 |
| 1" | Max 1.440 - Min 1.427 | Max 0.578 - Min 0.516 |
| 1-1/8" | Max 1.627 - Min 1.614 | Max 0.672 - Min 0.610 |
| 1-1/4" | Max 1.815 - Min 1.801 | Max 0.765 - Min 0.703 |
| 1-3/8" | Max 2.008 - Min 1.973 | Max 0.821 - Min 0.759 |
| 1-1/2" | Max 2.197 - Min 2.159 | Max 0.828 - Min 0.766 |
Product number:
1102-082-0132
