Sheet Metal Screws, Hex Washer Head, Self Drilling T3, Strong Shield Coated Steel, #10-16 x 1-1/2"
Strong-Shield Coating
| Quantity | Unit price |
|---|---|
| To 99 |
$0.13*
|
| To 999 |
$0.11*
|
| From 1000 |
$0.10*
|
- Across Flats (Width): 5/16" (Max 0.312 - Min 0.309)
- ASTM: C 1513 & A 510
- Color: Silver/Gray
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: External Hex
- Elongation: 30%
- Head Type: Hex Washer Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Strong-Shield
- Head Size: 5/16"
- Head Style: Hex Washer
- Length: 1-1/2"
- Material: Steel
- Point Type: TEK
- Product Type: Self Drilling Screws
- Standards Met: ASTM C 1513 & ASTM A 510, F.I.P.-1000.7, SAE J78
- System of Measurement: Inch
- TEK Self Drilling Point: TEK 3
- Thread Diameter Major: (#10) 0.189"
- Thread Diameter Minor: (#10) 0.141"
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: #10-16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Wrench Size: 5/16"
#10-16 Hex Washer Head Self Driller Screws come with a TEK-3 point for drilling and a Strong-Shield Coating for increased corrosion resistance.
- #10-16
- Hexagon drive for use with a wrench or socket
- Fully Threaded from tip to head
- Integral washer at the top of the head to minimize chance of pull-through
- Washer portion of screw distributes pressure over a larger surface area
- TEK 3 Point used for drilling into structural steel
- Strong-Shield Coating:
- High corrosion resistance
- Protection from acid rain & rust
- Works with ACQ treated lumber
- Exceeds 1,000/hrs. salt spray resistance
Product number:
1008-002-0022