Metric Hex Tap Bolts, Stainless Steel A2 (18-8), M6 x 1.0 x 10M
Diameter - Thread Pitch: M6-1.00
| Quantity | Unit price |
|---|---|
| To 99 |
$0.19*
|
| To 999 |
$0.10*
|
| From 1000 |
$0.09*
|
- Across Flats (Width): 10mm (Max 10.00mm - Min 9.78mm)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: M6
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- Grade: A2
- Head Height: 2.8mm
- Head Height Basic: 4 mm
- Head Style: Hex
- Length: 10M
- Material: Stainless Steel
- Part Number: 661291522796
- Product Type: Metric Hex Head Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 1.00 mm
- Thread Size: M6
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 10mm
- Yield PSI: 55,000 - 75,000
- M6-1.00
- Metric tap bolts have a hexagonal head, driven by a socket or a wrench
- Also referred to as tap bolts or hex bolts
- A trim head tap bolt has a smaller head than a standard hex head bolt
- Fully Threaded
- A2 Stainless steel metric tap bolts are used in exterior environments with fresh water
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Product number:
1021-220004-0012