Hex Tap Bolts, Grade 2 Zinc Plated Steel, 1/4"-20 x 1-1/4"
Diameter - Thread Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.21*
|
| To 999 |
$0.11*
|
| From 1000 |
$0.09*
|
- Across Flats (Width): 7/16" (Max 0.437 - Min 0.428)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 1/4"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 2A
- Grade: 2
- Head Height: Max 0.163 - Min 0.150
- Head Height Basic: 5/32"
- Head Height Max: 0.163
- Head Style: Hex
- Length: 1-1/4"
- Material: Steel
- Part Number: 720572131734
- Product Type: Hex Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 7/16"
- 1/4"-20
- Tap bolts are fully threaded from the point to the underside of the hex head
- Also referred to as a hex bolt
- Hexagonal head designed to be driven by wrench or socket
- Grade 2 Zinc plated steel tap bolts have no distinguishing marks on the head
- Grade 2/Grade A zinc plating is case hardened and corrosion resistant
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
Product number:
1102-0090-0002
Skip product gallery
Flat Washers, Zinc Plated Steel, SAE 1/4" (ID 0.281 x OD 0.625 x THK 0.076)
From
$0.02*
Subscription
Fender Washers, Zinc Plated Steel, 1/4" (ID 5/16" x OD 1-1/4")
From
$0.10*
Subscription
Lock Washers, Split Ring, Zinc Plated Steel, 1/4"(.252 ID x .487 OD x .062 THK)
From
$0.02*
Subscription
Frequently Used With
Size:
1/4"
Size x Outer Diameter:
1/4" x 1-1/4"
Size:
1/4"
