Hex Cap Screws, Hot Dipped Galvanized, 307A Grade A, 5/8"-11 x 1-1/2", Full Thread
Diameter - Thread Pitch: 5/8" - 11
| Quantity | Unit price |
|---|---|
| To 99 |
$1.44*
|
| To 999 |
$0.94*
|
| From 1000 |
$0.77*
|
- Across Flats (Width): 15/16" (Max 0.938 - Min 0.922)
- Color: Gray
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/8"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Hot Dip Galvanized
- Fit: 2A
- FT = Full Thread: Yes
- Grade: A307
- Head Height: Basic 25/64", Max 0.403 - Min 0.378
- Head Height Basic: 25/64"
- Head Height Max: 0.403
- Head Style: Hex
- Length: 1-1/2"
- Material: Steel
- Part Number: 730656615005
- Product Type: Hex Cap Screws
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 11 Per Inch
- Thread Size: 5/8"-11
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Width Across Corners: Max 1.083 - Min 1.051
- Wrench Size: 15/16"
- 5/8"-11
- Hexagon head designed to be driven by a wrench or socket
- Also called hex cap bolts, hex bolts, tap bolts or hex cap screws
- Hot dipped galvanized finish offers corrosion resistance due to the molten zinc bath finishing process
- Creates a bonded alloy coating
- Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
A hex cap screw in smaller sizes may not have a shoulder. When a hex cap screw is fully threaded it can also be referred to as a tap bolt.
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
**1/4"-20 Hex Cap Screws listed as PT, usually have a threaded portion of about 3/4".
However, this can vary slightly from manufacturer to manufacturer.
Product number:
1070-040-0022
Skip product gallery
Flat Washers, USS, Hot Dipped Galvanized, 5/8" (ID 11/16", OD 1-3/4")
From
$0.35*
Subscription
Frequently Used With
Size:
5/8"
