Flat Washers, Stainless Steel 316, 5/8" (0.687 ID x 1-1/2 OD x .078 THK)
316 Stainless Steel Suitable for Marine Applications
Quantity | Unit price |
---|---|
To 99 |
$1.02*
|
To 999 |
$0.61*
|
From 1000 |
$0.51*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/8"
- Grade: 316
- Marine Grade: Yes
- Material (Duplicate): 316 Stainless Steel
- Material: Stainless Steel
- Outside Diameter (OD): 1-1/2"
- Part Number: 046737875832
- Pattern: Flat Washer
- Product Type: Flat Washers
- Size: 5/8"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Used to distribute fastener pressure evenly
- Can act as a flat surface area for nut or bolt to tighten against
- 316 stainless steel washers are used in marine applications including
- Boats
- Decks
- Docks
- Hot Rods
- Oil Rigs
- Industrial Applications
A 316 flat washer is a round outer diameter thin plate with a center hole (inner diameter) punched to the size of the bolt or screw size.
Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
#4 | 0.125" | 0.312" | 0.031" |
#6 | 0.150" | 0.312" | 0.031" |
#8 | 0.174" | 0.375" | 0.031" |
#10 | 0.203" | 0.437" | 0.050" |
#12 | 0.250" | 9/16" | 0.050" |
1/4" | 0.281" | 5/8" | 0.050" |
5/16" | 0.343" | 3/4" | 0.050" |
3/8" | 0.406" | 7/8" | 0.050" |
7/16" | 0.500" | 1-1/8" | 0.062" |
1/2" | 0.531" | 1-1/4" | 0.062" |
9/16" | 0.625" | 1-3/8" | 0.078" |
5/8" | 0.687" | 1-1/2" | 0.078" |
3/4" | 0.812" | 1-7/8" | 0.109" |
7/8" | 0.937" | 2" | 0.109" |
1" | 1.062" | 2" | 0.125" |
1-1/8" | 1.187" | 2-1/2" | 0.125" |
1-1/4" | 1.312" | 2-3/4" | 0.125" |
1-3/8" | 1.500" | 3-1/4" | 0.140" |
1-1/2" | 1.562" | 3-1/4" | 0.140" |
1-3/4" | 1.812" | 3-1/2" | 0.140" |
2" | 2.125" | 4" | 0.187" |
Product number:
12280133