Print this page
Machine Screw, Phillips Round Head, Stainless Steel 18-8, #10-24

Machine Screw, Phillips Round Head, Stainless Steel 18-8, #10-24

Diameter - Thread Pitch: #10-24

  • Driven by Phillips screwdriver or bit
  • ASME standards specific
  • A machine screw is commonly identified by its small size
  • Domed head is similar to a button head but more of a half sphere
  • Rust resistant

#10-24 Phillips round head machine screws are available in grade 18-8 stainless steel.

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#10-24 x 5/8"
SKU #5800-004-0002
#10-24 x 5/8"
SKU #5800-004-0002
1 $0.36 (0.36/ea)
100 $11.00 (0.11/ea)
1000 $100.00 (0.1/ea)
Subtotal: $0.00 /

Frequently Used With

Hex Machine Nuts, Stainless Steel 304, #10-24 (3/8 Flats x 1/8 Thick)
Hex Machine Nuts, Stainless Steel 304, #10-24 (3/8 Flats x 1/8 Thick) 125082
Hex Machine Nuts, Stainless Steel 304, #10-24 (3/8 Flats x 1/8 Thick)
1 $0.08 (0.08/ea)
100 $5.00 (0.05/ea)
1000 $40.00 (0.04/ea)
Subtotal: $0.00
Flat Washers, Stainless Steel 304, #10 (.203 ID x .437 OD x .063 Thick)
Flat Washers, Stainless Steel 304, #10 (.203 ID x .437 OD x .063 Thick) 1000-105122
Flat Washers, Stainless Steel 304, #10 (.203 ID x .437 OD x .063 Thick)
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
Lock Washers, Split Ring, Stainless Steel 304, #10 (.193 ID x .293 OD x .040 Thick)
Lock Washers, Split Ring, Stainless Steel 304, #10 (.193 ID x .293 OD x .040 Thick) 108082
Lock Washers, Split Ring, Stainless Steel 304, #10 (.193 ID x .293 OD x .040 Thick)
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
Nylon Lock Nuts, Stainless Steel 304, #10-24 (.376 Flats x .249 Height)
Nylon Lock Nuts, Stainless Steel 304, #10-24 (.376 Flats x .249 Height) 128052
Nylon Lock Nuts, Stainless Steel 304, #10-24 (.376 Flats x .249 Height)
1 $0.12 (0.12/ea)
100 $8.00 (0.08/ea)
1000 $70.00 (0.07/ea)
Subtotal: $0.00
Product Specifications
Product Specifications
ANSI
B1.1
Color
Silver
Corrosion Resistant
Yes
Diameter
#10
Drive Style
Phillips
Grade
18-8
Head Diameter
Max 0.359 - Min 0.334
Head Style
Round
Material
Stainless Steel
Overall Head Height
Max 0.137 - Min 0.123
Product Type
Machine Screws
Standards Met
Class 2A Fit, ANSI B1.1
System of Measurement (Unit)
Inch
Thread Diameter
(#10) Max 0.1890 - Min 0.1818
Thread Direction
Right Hand
Thread Pitch (Count)
24 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about Machine Screw, Phillips Round Head, Stainless Steel 18-8, #10-24

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.