Print this page
Drop-In Anchors, Zinc Plated Steel

Drop-In Anchors, Zinc Plated Steel

Drop-In Female Anchors for Concrete and Stone Applications

  • Used in flush-mount applications in solid base materials
  • Installed crimped side down in a pre-drilled hole
  • Require a setting tool for proper installation
  • Zinc adds a layer of corrosion resistance to the drop-in anchors
  • Zinc plated steel is not suitable for extreme environment use

A Drop In anchor is a female (internal) threaded concrete anchor, often installed overhead that runs flush with the surface of concrete or stone.

Thread Diameter - Thread Pitch x Length of Anchor

Thread Diameter: Drop-In Anchor Length: Drill (Hole) Size: Internal Threaded Length:
1/4" 1" 3/8" 1/2"
3/8" 1-9/16" 1/2" 13/16"
1/2" 2" 5/8" 1-1/4"
5/8" 2-1/2" 7/8" 2"
3/4" 3-1/8" 1" 2"

Frequently Purchased With:

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
1/4"-20 x 1"
SKU #1040-002-0002
1/4"-20 x 1"
SKU #1040-002-0002
1 $0.42 (0.42/ea)
100 $26.00 (0.26/ea)
1000 $240.00 (0.24/ea)
Subtotal: $0.00 /
3/8"-16 x 1-9/16"
SKU #1040-002-0012
3/8"-16 x 1-9/16"
SKU #1040-002-0012
1 $0.54 (0.54/ea)
100 $37.00 (0.37/ea)
1000 $340.00 (0.34/ea)
Subtotal: $0.00 /
1/2"-13 x 2"
SKU #1040-002-0022
1/2"-13 x 2"
SKU #1040-002-0022
1 $0.94 (0.94/ea)
100 $65.00 (0.65/ea)
1000 $590.00 (0.59/ea)
Subtotal: $0.00 /
5/8"-11 x 2-1/2"
SKU #1040-002-0032
5/8"-11 x 2-1/2"
SKU #1040-002-0032
1 $2.20 (2.2/ea)
100 $150.00 (1.5/ea)
1000 $1,450.00 (1.45/ea)
Subtotal: $0.00 /
3/4"-10 x 3-1/8"
SKU #1040-002-0042
3/4"-10 x 3-1/8"
SKU #1040-002-0042
1 $2.96 (2.96/ea)
100 $212.00 (2.12/ea)
1000 $2,010.00 (2.01/ea)
Subtotal: $0.00 /

Frequently Used With

SDS-Plus 4 Cutter Carbide Drill Bit, 3/8" x 4" x 6"
SDS-Plus 4 Cutter Carbide Drill Bit, 3/8" x 4" x 6" 1162-012-0002
SDS-Plus 4 Cutter Carbide Drill Bit, 3/8
1 $10.32 (10.32/ea)
2 $19.62 (9.81/ea)
5 $45.15 (9.03/ea)
10 $77.40 (7.74/ea)
Subtotal: $0.00
SDS-Plus 4 Cutter Carbide Drill Bit, 1/2" x 4" x 6"
SDS-Plus 4 Cutter Carbide Drill Bit, 1/2" x 4" x 6" 1162-014-0002
SDS-Plus 4 Cutter Carbide Drill Bit, 1/2
1 $13.05 (13.05/ea)
2 $24.80 (12.4/ea)
5 $57.10 (11.42/ea)
10 $97.90 (9.79/ea)
Subtotal: $0.00
SDS-Plus 4 Cutter Carbide Drill Bit, 5/8" x 6" x 8"
SDS-Plus 4 Cutter Carbide Drill Bit, 5/8" x 6" x 8" 1162-016-0002
SDS-Plus 4 Cutter Carbide Drill Bit, 5/8
1 $25.20 (25.2/ea)
2 $47.88 (23.94/ea)
5 $110.25 (22.05/ea)
10 $189.00 (18.9/ea)
Subtotal: $0.00
Hole Cleaning Brushes, 1/2" Brush - 9/16" Hole
Hole Cleaning Brushes, 1/2" Brush - 9/16" Hole 1166-002-0012
Hole Cleaning Brushes, 1/2
1 $28.64 (28.64/ea)
10 $272.10 (27.21/ea)
Subtotal: $0.00
Hole Cleaning Brushes, 5/8" Brush - 11/16" Hole
Hole Cleaning Brushes, 5/8" Brush - 11/16" Hole 1166-002-0022
Hole Cleaning Brushes, 5/8
1 $29.27 (29.27/ea)
10 $278.10 (27.81/ea)
Subtotal: $0.00
Hole Cleaning Brushes, 3/4" Brush - 7/8" Hole
Hole Cleaning Brushes, 3/4" Brush - 7/8" Hole 1166-002-0032
Hole Cleaning Brushes, 3/4
1 $30.20 (30.2/ea)
10 $286.90 (28.69/ea)
Subtotal: $0.00
Hole Cleaning Brushes, 7/8" Brush - 1" Hole
Hole Cleaning Brushes, 7/8" Brush - 1" Hole 1166-002-0042
Hole Cleaning Brushes, 7/8
1 $30.39 (30.39/ea)
10 $288.70 (28.87/ea)
Subtotal: $0.00
Product Specifications
Product Specifications
Drive Style
Drop In Anchor Setting Tool
Finish
Zinc Plated
Head Style
Dome
Material
Steel
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about Drop-In Anchors, Zinc Plated Steel

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.