Split Drive Flat Head Anchor, Zinc Plated Steel, 1/4" x 3"
for permanent or tamper proof applications
| Quantity | Unit price |
|---|---|
| To 99 |
$0.65*
|
| To 999 |
$0.55*
|
| From 1000 |
$0.45*
|
- Across Flats (Width): 1/4"
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 1/4"
- Head Type: Flat Head
- Finish: Zinc Plated
- Head Style: Flat
- Length: 3"
- Material (Duplicate): Carbon Steel
- Material: Carbon Steel
- Part Number: 3661114122971
- Pattern: Split Drive Anchors
- Product Type: Anchor
- Size: 1/4" x 3"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Size: 1/4"
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
The Split Drive Flat Head Anchor, also know as a split-fast anchor, is a one-piece mechanical anchor designed for anchoring into solid concrete, wood, and stone base materials. These tamper-proof anchors provide a secure and permanent fastening solution once installed.
- Ideal for fastening wood to concrete with a flush, countersunk head
- Pre-expanded friction anchor provides superior holding power
- Tamper-proof design prevents removal once installed
- No special tools required - drill hole and hammer in anchor
- Available in zinc-plated carbon steel for indoor/dry environments
Installation:
- Drill a hole into the concrete using a 1/4" carbide-tipped drill bit that meets ANSI standards
- Hole depth should be 1/2" deeper than the anchor length for proper embedment
- Clear hole of debris using a wire brush or compressed air
- Insert the anchor through fixture and into pre-drilled hole
- Drive the split hammer drive pin anchor until the head is flush against the surface.
Available Sizes:
- 1/4" x 1-1/2"
- 1/4" x 2"
- 1/4" x 3"
- 1/4" x 4"
Choose from our selection on 1/4" Split Drive Flat Head Anchor for your masonry fastening needs. These strong Split Drive Flat Zinc Plated Anchors are reliable and resistant to corrosion. They work well in concrete, brick, and block applications.
Product number:
1148-002-0012
