Machine Screw Anchor Setting Tools, #6
Tools to Properly Install Machine Screw Anchors
$0.75*
- Additional Sizing Info: Size of tool corresponds with size of anchor being installed
- Color: Silver
- Diameter: #6
- Finish: Zinc Plated
- Material: Steel
- Product Type: Machine Screw Anchor Set Tool
- System of Measurement: Inch
- Thread Pitch: 6 Per Inch
- Thread Size: #6
- Required for proper installation of Machine Screw Anchors
- Size of set tool corresponds with size of matching anchor (ex: #6 set tool for a #6 anchor)
- CR+3 Zinc Plated Steel for corrosion resistance and durability
- Can be used repeatedly to set multiple anchors
- Struck with a hammer to set each anchor properly
These set tools are used to properly install machine screw anchors into masonry materials such as brick, concrete or stone. To install a machine screw anchor, you must first drill a pilot hole into the masonry material. Next the anchor is tapped with a hammer until the top is flush with the installation surface. Finally, the center peg of the setting tool is inserted into the anchor, and struck with a hammer until the lip of the anchor connects with the lip of the tool. This ensures that the anchor is installed into the masonry material properly.
Product number:
6210-004-002