ArcOne X450V Variable Shade Auto Darkening Digital Welding Filter

ArcOne X450V Auto-Darkening Welding Filter

Variable Shade 9-12 Premium Welding Filter


Our Price: $456.37
 Smallest Pkg: 1
Subtotal: $0.00


SKU: 2090-188

  • ArcOne X450V Xtreme Auto-Darkening Welding Filter
  • Horizontal - 4" x 5"
  • Viewing Area: 12.6"
  • 4 independent sensors
  • Variable Sensitivity
  • Light State: 3
  • Dark State (Shade): 9-12
  • TIG Rating: 5 Amps
  • Grind Mode
  • Delay
  • Switching speed of 0.1 milliseconds
  • Water and dust resistant

ArcOne X450V Xtreme Auto-Darkening Filter 4-1/2-Inch x 5-1/4-Inch x .267-Inch Horizontal has an unbelievable 40 percent larger viewing area than any other auto-darkening filter on the market. This filter provides 12.6 square inches of active viewing area. Available in a Single Shade 10.5 or Variable Shade 9-12 filter. A specialized TIG filter with an additional MIG/Stick mode and built-in sensitivity and delay. Four factory tuned independent sensors are located in all four quadrants of the filter, to provide maximum arc detection so the filter will stay dark as needed and minimize any chance of total sensor block. This filter features a power off mode specifically designed to maintain the light state when grinding, a dark to light state of delay of 0.1 and 2 seconds, as well as up to shade 16 UV/IR protection. This filter has a switching speed of 0.1 milliseconds, is water and dust resistant and has a light state 3.