Metric Hex Tap Bolts, Stainless Steel A2 (18-8), M14 x 2.0 x 25M
Diameter - Thread Pitch: M14-2.00
| Quantity | Unit price |
|---|---|
| To 99 |
$1.93*
|
| To 999 |
$1.47*
|
| From 1000 |
$1.29*
|
- Across Flats (Width): 21mm (Max 22.00mm - Min 21.61mm)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: M14
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- Grade: A2
- Head Height Basic: Max 8.98mm - Min 8.62mm
- Head Style: Hex
- Length: 25M
- Material: Stainless Steel
- Part Number: 661291523656
- Product Type: Metric Hex Head Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 2.00 mm
- Thread Size: M14
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 21mm
- Yield PSI: 55,000 - 75,000
- M14-2.00
- Metric tap bolts have a hexagonal head, driven by a socket or a wrench
- Also referred to as tap bolts or hex bolts
- A metric trim head tap bolt has a smaller head than a standard hex head bolt
- Fully Threaded
- A2 Stainless steel metric tap bolts are used in exterior environments with fresh water
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Product number:
1021-220014-0002