Concrete Coil Threaded Drop In Anchors, Zinc Plated Steel, 1/2" x 2
Drop-In Female Anchors for Concrete and Stone Applications
| Quantity | Unit price |
|---|---|
| To 99 |
$2.85*
|
| To 999 |
$2.25*
|
| From 1000 |
$2.00*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Drive Style: Drop In Anchor Setting Tool
- Head Type: No Head
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Head Style: Dome
- Length: 2
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Part Number: 3661114122483
- Pattern: Drop-In Anchors
- Product Type: Threaded Drop In Anchors
- Size: 1/2" x 2
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Size: 1/2"-13
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
Concrete Coil Threaded Drop In Anchors - Secure Fastening for Solid Base Materials
- Female (internal) threaded concrete anchor
- Ideal for attaching coil rod to concrete, block, and brick
- Used in flush-mount applications
- Installed crimped side down in a pre-drilled hole
- Requires a setting tool for proper installation
- Zinc plated for corrosion resistance
- Not suitable for extreme environments
Technical Data | Installation Instructions
Product Description:
The Concrete Coil Threaded Drop In Anchor provides a robust solution for securing coil rod to solid base materials such as concrete, block, and brick. Design these anchors for flush-mounting. Install them with the crimped side down into pre-drilled holes for a strong and dependable connection. Utilizing a setting tool is essential for proper installation.
The coil drop-in anchor's zinc plating adds an extra layer of corrosion resistance, enhancing the longevity of the drop-in anchors. However, it's important to note that zinc plated steel may not be suitable for use in extreme environments.
Available Sizes:
1/2" Diameter- Drop-In Anchor Length: 2"
- Drill (Hole) Size: 5/8"
- Internal Threaded Length: 13/16"
- Drop-In Anchor Length: 3-3/16"
- Drill (Hole) Size: 1"
- Internal Threaded Length: 1-3/8"
Installation Instructions:
The Concrete Coil Threaded Drop In Anchors were designed for straightforward installation. Simply follow these steps:
- Drill a hole to the specified size.
- Clean hole of all debris and dust; for this step you can use compressed air or hole cleaning brushes
- Insert the anchor crimped side down into the hole.
- Use a setting tool to ensure proper installation and secure the anchor in place.
For step-by-step guidance, please consult our Installation Instructions.
Choose Concrete Coil Threaded Drop In Anchors. They also go by the name Internally Threaded Drop In Expansion Anchors. They are Zinc Plated for secure construction fastening.
