SDS Plus Carbide Concrete Drill Bits, 5/32" x 6"
Premium Masonry Drill Bits
SDS Plus Concrete Hammer Drill Bits with Carbide Tips fit in simple spring-loaded chucks, so that bits are simply pushed into the chuck without tightening. SDS Hammer Drill Bits are well suited to hammer drilling with masonry drills in stone and concrete, specifically working well with rotary hammer drills that have an SDS compatible chuck. These bits are often commonly referred to simply as a concrete drill bit, masonry drill bit, or hammer drill bit.
The SDS drill bit is not held solidly by the drill's chuck but instead moves like a piston, sliding back and forth while secured by the chuck. The SDS shank ensures no rotational slipping of the bit, locking in the chuck of the drill used. SDS bits both reciprocate and turn simultaneously, requiring little effort from the user for most projects. However, pushing down on the drill when it's unnecessary will only slow the drilling process and wear the bit down faster.
The Carbide tipped drill bit head provides greater durability and hardness to the bit head making them tougher and more resistant to extreme loads.
CAUTION: Any cutting tool may break or shatter. Safety glasses and equipment should be used at all times.
