Sheet Metal Screws, Phillips Pan Head, Zinc Plated Steel, #10 x 1/4"
Diameter - Thread Pitch: #10-16
| Quantity | Unit price |
|---|---|
| To 99 |
$0.05*
|
| To 999 |
$0.04*
|
| From 1000 |
$0.03*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Pan Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Head Diameter: Max 0.373 - Min 0.357
- Head Style: Pan
- Length: 1/4"
- Material: Steel
- Overall Head Height: Max 0.110 - Min 0.099
- Part Number: 8200-008
- Phillips Drive: #2
- Point Type: AB
- Product Type: Sheet Metal Screws
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Diameter Major: (#10) 0.194" - 0.188"
- Thread Diameter Minor: (#10) 0.133" - 0.126"
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: #10-16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- #10-16
- Cut into sheet metal, plastic or wood
- Fully threaded
- Great for attaching metal to wood
- Strong retention in wood
- Also known as Self Piercing Screws or Self Tapping Screws
- Pan head - rounded top with an undercut (flat bottom) head
- Sizes listed below as: Diameter - Thread Pitch
- A zinc plated Phillips pan head sheet metal screw can be a light shiny color or have a bright blue hue
- Zinc plated steel is corrosion resistant, but it is not recommended for harsh environments
Product number:
8200-008-0002
Skip product gallery
Flat Washers, Zinc Plated Steel, SAE #10 (ID 0.220 x OD 0.500 x THK 0.064)
From
$0.01*
Subscription
Lock Washers, Split Ring, Zinc Plated Steel, #10 (.193 ID x .293 OD x .040 THK)
From
$0.01*
Subscription
Frequently Used With
Size:
#10
Size:
#10
