Double Expansion Shield Anchors, Zamac Zinc Alloy, 5/8"-11 x 2-3/4"
Zamak Zinc Alloy Concrete Anchors for Masonry Screws or Bolts
| Quantity | Unit price |
|---|---|
| To 99 |
$4.29*
|
| To 999 |
$3.34*
|
| From 1000 |
$2.82*
|
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: 5/8"
- Head Type: No Head
- Thread Direction: Right Hand
- Grade: Zamac Zinc
- Length: 2-3/4"
- Material: Zamak Zinc Alloy
- Product Type: Double Expansion Shield Anchors
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 11 Per Inch
- Thread Size: 5/8"-11
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Zamak Zinc Alloy
- Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit
- Used in soft masonry with machine screws or machine bolts
- Can also be used in harder materials, including stone, brick, concrete or block
- Expansion of the band or shield occurs during installation
- For applications that deal in shear loads or where the bolts are subjected to pressure or vibration
A Double Expansion Shield Anchor is suited to anchor into materials of questionable strength such as materials that may be soft or of low quality. This is due to the design of the double expansion anchor as it expands upon its entire length, maximizing friction and holding power even in low quality or suspect materials. Can be used in brick, block, and stone as well.
| Thread Size: | Recommended Hole Diameter: | Minimum Diameter of Shield Body: | Minimum Length of Shield Body: | Proof Test Load (Ultimate Tensile Strength in 3000 psi. strength concrete) |
| 1/4"-20 | 1/2" | 1/2" | 1-5/16" | 1100 |
| 5/16"-18 | 5/8" | 9/16" | 1-5/8" | 1450 |
| 3/8"-16 | 3/4" | 1/16" | 2" | 1750 |
| 1/2"-13 | 7/8" | 7/8" | 2-1/4" | 2200 |
| 5/8"-11 | 1" | 1" | 2-3/4" | 3250 |
| 3/4"-10 | 1-1/4" | 1-1/8" | 3-1/4" | 4600 |
Product number:
1044-004-042
