Kit, Hurricane Hardware Sidewalk Bolts with Drop in Anchors Combo Drive, Stainless Steel
Hurricane Hardware Sidewalk Bolts with Drop In Masonry Anchors
$57.49*
- asme: 1
- Corrosion Resistant: Yes
- Head Type: Oversize Truss Head
- Kit: Yes
- Material: Stainless Steel
- Product Type: Hurricane Kits
- Searchable field for kits: kits kit
- System of Measurement: Inch
- Kit Contents:
- 1/4"-20 x 1-1/2" Phillips / Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel - 24 pieces
- 1/4"-20 x 1" Drop In Masonry Anchors 18-8 Stainless Steel - 24 pieces
- 1/4" Drop In Anchor Setting Tool
- 1/4"-20 Thread Size / Diameter
- Corrosion Resistant 18-8 Stainless Steel Bolts and Anchors
- Phillips / Slotted Combo Drive Style for convenience
- Oversized Diameter Low Profile Head
- Heavy duty, stainless steel masonry anchors for superior holding power
- Fixtures can be removed or replaced
- Includes setting tool for proper anchor installation
Stainless steel Sidewalk Bolts are often referred to as Hurricane Bolts because their most common application is installing hurricane shutters. They are also referred to as Sidewalk Bolts because of their ultra low-profile head which can be easily stepped on or rolled over which is why they are also often used with concrete anchors to attach materials and fixtures to masonry surfaces. Sidewalk bolts in this selection are made of 18-8 stainless steel to withstand the elements without corroding or rusting and feature a drive that can be installed using a Phillips or Slotted Screwdriver / bit.
Drop In Anchors, like many types of female thread masonry anchors require a special setting tool for a proper installation. After the anchor is installed into the hole in the masonry material, the set tool is then placed in the middle of the threaded portion and struck with a hammer to ensure that the anchor has set correctly. In this selection, we have included a matching Setting Tools for a convenient all in one kit.
Product Disclaimer
These hurricane hardware kits are assembled for customer convenience to assist in the preparation and protection of residential or commercial properties during hurricanes, nor’easters, severe storms, and adverse weather conditions. While the components have been selected to help secure plywood panels and reduce the risk of damage, weather conditions such as wind speed, flying debris, and storm severity can vary greatly and may exceed the protective capabilities of this kit.
Use of this product does not guarantee the prevention of property damage or personal injury. Always follow local building codes, consult with a licensed contractor when in doubt, and stay informed through official weather advisories and emergency management recommendations.
Albany County Fasteners assumes no liability for damages or losses resulting from storm events or use or misuse of this product.