Metric Hex Tap Bolts, Stainless Steel A2 (18-8), M10 x 1.5 x 16M
Diameter - Thread Pitch: M10-1.50
| Quantity | Unit price |
|---|---|
| To 99 |
$0.53*
|
| To 999 |
$0.38*
|
| From 1000 |
$0.35*
|
- Across Flats (Width): 16mm (Max 17.00mm - Min 16.73mm)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: M10
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- Grade: A2
- Head Height Basic: Max 6.58mm - Min 6.22mm
- Head Style: Hex
- Length: 16M
- Material: Stainless Steel
- Part Number: 661291523212
- Product Type: Metric Hex Head Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 1.50 mm
- Thread Size: M10 x 1.5
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 16mm
- Yield PSI: 55,000 - 75,000
- M10-1.50
- Metric tap bolts have a hexagonal head, driven by a socket or a wrench
- Also referred to as tap bolts or hex bolts
- A metric trim head tap bolt has a smaller head than a standard hex head bolt
- Fully Threaded
- A2 Stainless steel metric tap bolts are used in exterior environments with fresh water
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Frequently Used With
