Floating Cage Retainer Weld Nuts in Plain Steel, 1/4"-20
Weld Nut with a Floating Cage Nut for Misaligned Holes
| Quantity | Unit price |
|---|---|
| To 99 |
$2.20*
|
| To 999 |
$1.75*
|
| From 1000 |
$1.65*
|
- Across Flats (Width): 9/16"
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 1/4"
- Thread Direction: Right Hand
- Finish: Plain
- Fit: 2B
- Internal Thread: 1/4/2020
- Material (Duplicate): Plain Steel
- Material: Plain Steel
- Part Number: W92010
- Pattern: Retainer Weld Nuts
- Product Type: Retainer Weld Nut
- Size: 1/4"-20
- Size System: United States
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
Retainer weld nuts, also known as bridge weld nuts or floating cage nuts, have a floating nut held within a "cage" or retainer to allow off-center or misaligned screws to be installed. The retainer itself is welded to a workpiece while the nut is allowed to float freely and help compensate for building inconsistencies.
These types of weld nuts are well suited to projects with hole misalignment and blind assembly. Floating Retainer Weld Nuts come in plain steel.
You can find these nuts used in many applications including:- Fork Lifts
- Rail Cars
- Ocean Containers
- Automobiles
- Furniture
- Applicances
- And Many More!
Retainer Weld Nuts sizes are displayed as the Thread Size (Diameter x Thread Pitch) for the Nut within the Retainer Cage
You May Also Like:
| Welding Safety Equipment |
|
NOTE: Measurements below are for the ENTIRE Retainer Assembly
| Size | Length | Thickness | Width |
| 1/4" | 1-3/4" | 7/16" | 9/16" |
| 5/16" | 2" | 33/64" | 25/32" |
| 3/8" | 2" | 33/64" | 25/32" |
| 1/2" | 2-1/4" | 17/32" | 15/16" |
Frequently Used With
