Wedge Anchor Hot Dipped Galvanized 7/8"-9 x 6"

Diameter - Pitch: 7/8"-9

Quantity	Unit price
To 99	$9.86*
To 999	$7.59*
From 1000	$6.98*

Diameter x Length

7/8"-9 x 6"

7/8"-9 x 8"

Across Flats (Width): 1-15/16" (Max 1.321 - Min 1.285)
Color (Duplicate): Gray
Color: Gray
Condition: New
Corrosion Resistant: Yes

Diameter: 7/8"
Drill (Hole) Size: 7/8"
Drive Style: External Hex
Head Type: No Head
Thread Direction: Right Hand
Thread Type: Coarse
Finish: Hot Dip Galvanized
Head Style: No Head
Length: 6"
Material (Duplicate): Hot Dipped Galvanized Steel
Material: Hot Dipped Galvanized Steel
Other: Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Part Number: 730656626650
Pattern: Wedge Anchor
Product Type: Wedge Anchors
Size: 7/8"-9 x 6"
Size System: US
Size Type: Regular
System of Measurement: Inch
Thread Direction: Right Hand
Thread Pitch: 9 Per Inch
Thread Size: 7/8"-9
Thread Standard: UNC
Thread Type: Coarse
Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Weight: 1 lb
Wrench Size: 1-15/16"

Toggle More

Corrosion resistant
Molten Zinc bath finishing process creates a bonded alloy coating
Used to secure equipment to masonry surfaces
Installed into pre-drilled holes
Non-threaded end is inserted into the whole then struck to expand
The nut is then tightened against the washer to the installation material
Used to secure:
- Materials
- Pumps
- Generators
- Plastics
- Many More
Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.

A 7/8"-9 Hot Dipped Galvanized Concrete Masonry Wedge Anchor, also sometimes called an anchor bolt or expansion wedge, is used to anchor and secure material and equipment to concrete masonry surfaces. Anchor bolts consist of an expansion wedge bolt, a hex nut, and a flat washer.

Product number: 1070-072-0002

SIZE/SKU	SELECT PACKAGE QUANTITY			SUBTOTAL
7/8"-9 x 6" 1070-072-0002	1 $9.86 (9.86/ea)	100 $759.00 (7.59/ea)	1000 $6,980.00 (6.98/ea)	Quantity for Wedge Anchor Hot Dipped Galvanized 7/8"-9 x 6" $0.00
7/8"-9 x 8" 1070-072-0012	1 $11.72 (11.72/ea)	100 $902.00 (9.02/ea)	1000 $8,300.00 (8.3/ea)	Quantity for Wedge Anchor Hot Dipped Galvanized 7/8"-9 x 8" $0.00

Page Total: $0.00

Frequently Used With

Curved Claw Hammer

$21.25*

Subscription

Hole Cleaning Brushes, 3/4" Brush - 7/8" Hole

Size: 3/4" Brush - 7/8" Hole

From $28.69*

Subscription

MRO Solution 2400, Marine Grade Anti-Seize Lubricant, 8 oz.

$18.11*

Subscription

SAIT, Cutting Wheels, The Ultimate Cut, Type 1 4-1/2" x .045" x 7/8"

Size: Cutting Wheels

From $5.76*

Subscription