Wedge Anchor, Zinc Plated Steel, 5/8"-11 x 3-1/2"
Diameter - Pitch: 5/8"-11
| Quantity | Unit price |
|---|---|
| To 99 |
$1.81*
|
| To 999 |
$1.75*
|
| From 1000 |
$1.69*
|
- Across Flats (Width): 15/16" (Max 0.938 - Min 0.922)
- Additional Sizing Info: Wedge Anchors
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 5/8"
- Drill (Hole) Size: 5/8"
- Drive Style: External Hex
- Head Type: No Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Grade: 5
- Head Style: No Head
- Length: 3-1/2"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Other: Listed As
- Part Number: 730656625325
- Pattern: Wedge Anchor
- Product Type: Wedge Anchors
- Size: 5/8"-11 x 3-1/2"
- Size System: US
- Size Type: Regular
- Standards Met: REACH and RoHS Compliant
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 11 Per Inch
- Thread Size: 5/8"-11
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 15/16"
5/8"-11 (Grade 5) Zinc Plated Wedge Anchors - Secure Fastening Solution for Concrete and Masonry Applications
- 5/8"-11 thread size zinc plated wedge anchors for concrete and masonry
- Zinc plated carbon steel construction for corrosion resistance in dry environments
- Expansion wedge design provides secure anchoring in pre-drilled holes
- Complete with hex nut and washer for easy installation
- Ideal for anchoring equipment, fixtures, and structural elements to concrete
- Not recommended for exterior or wet environment applications
5/8-11 zinc plated steel wedge anchors, also known as anchor bolts or expansion anchors, are designed to provide a reliable and secure fastening solution for anchoring materials and equipment to concrete and masonry surfaces. The wedge anchors consist of carbon steel with an expansion clip, hex nut, and flat washer attached. The zinc plated finish offers corrosion resistance in dry, indoor environments.
To install, start by drilling a hole into the base material using a carbide-tipped drill bit. Then, insert the anchor through the fixture and into the hole. Finally, tighten the nut to expand the clip against the walls of the hole. This expansion provides a strong, secure hold in the concrete or masonry.
Our 5/8-11 zinc plated wedge anchors are available in a variety of lengths to suit different application requirements. People commonly use them to anchor structural steel, equipment, racking, railings, and other fixtures to concrete surfaces.
Do not use these Grade 5 zinc plated anchors outdoors or in wet environments as they can rust. Rusting may occur in those conditions. For outdoor or damp installations, consider using hot-dip galvanized or stainless steel wedge anchors instead.
Available Sizes:
- Wedge Anchor Zinc - 5/8"-11 x 3-1/2"
- Wedge Anchor Zinc - 5/8"-11 x 4-1/2"
- Wedge Anchor Zinc - 5/8"-11 x 5"
- Wedge Anchor Zinc - 5/8"-11 x 6"
- Wedge Anchor Zinc - 5/8"-11 x 7"
- Wedge Anchor Zinc - 5/8"-11 x 8-1/2"
- Wedge Anchor Zinc - 5/8"-11 x 10"
- Wedge Anchor Zinc - 5/8"-11 x 12"
Choose the appropriate size of 5/8-11 zinc plated wedge anchors for your specific concrete and masonry anchoring needs. These wedge anchors are easy to install and have strong holding power. They are a cost-effective option for fastening things in dry, indoor spaces.
REACH and RoHS compliant for your peace of mind.
Frequently Used With
