Wedge Anchor Hot Dipped Galvanized 5/8"-11 x 3-1/2"
Diameter - Pitch: 5/8"-11
| Quantity | Unit price |
|---|---|
| To 99 |
$3.88*
|
| To 999 |
$2.98*
|
| From 1000 |
$2.74*
|
- Across Flats (Width): 15/16" (Max 0.938 - Min 0.922)
- Additional Sizing Info: Wedge Anchors
- Color (Duplicate): Gray
- Color: Gray
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/8"
- Drill (Hole) Size: 5/8"
- Drive Style: External Hex
- Head Type: No Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Hot Dip Galvanized
- Head Style: No Head
- Length: 3-1/2"
- Material (Duplicate): Hot Dipped Galvanized Steel
- Material: Hot Dipped Galvanized Steel
- Other: Listed As: Diameter - Thread Pitch x Length from Tip to Tip
- Part Number: 730656626407
- Pattern: Wedge Anchor
- Product Type: Wedge Anchors
- Size: 5/8"-11 x 3-1/2"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 11 Per Inch
- Thread Size: 5/8"-11
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 15/16"
- Corrosion resistant
- Molten Zinc bath finishing process creates a bonded alloy coating
- Used to secure equipment to masonry surfaces
- Installed into pre-drilled holes
- Non-threaded end is inserted into the whole then struck to expand
- The nut is then tightened against the washer to the installation material
- Used to secure:
- Materials
- Pumps
- Generators
- Plastics
- Many More
- Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
- Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
A 5/8"-11 Hot Dipped Galvanized Concrete Masonry Wedge Anchor, also sometimes called an anchor bolt or expansion wedge, is used to anchor and secure material and equipment to concrete masonry surfaces. Anchor bolts consist of an expansion wedge bolt, a hex nut, and a flat washer.
Product number:
1070-068-0002
Skip product gallery
Hole Cleaning Brushes, 1/2" Brush - 9/16" Hole
From
$27.21*
Subscription
SAIT, Cutting Wheels, The Ultimate Cut, Type 1 4-1/2" x .045" x 7/8"
From
$5.76*
Subscription
Frequently Used With
Size:
1/2" Brush - 9/16" Hole
Size:
Cutting Wheels