Lag Screws, Hex Head, Stainless Steel 316, 3/8" x 1"
Diameter - Thread Pitch: 3/8" - 7
| Quantity | Unit price |
|---|---|
| To 99 |
$1.86*
|
| To 999 |
$1.32*
|
| From 1000 |
$1.19*
|
- Across Flats (Width): 9/16" (Max 0.562 - Min 0.551)
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: 3/8"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 316
- Head Height Basic: 1/4"
- Head Style: Hex
- Length: 1"
- Marine Grade: Yes
- Material: Stainless Steel
- Product Type: Lag Screws
- System of Measurement: Inch
- Thread Length Max: Hex Lag Screws in 3/8" diameter are Partial Thread in lengths 1" and over
- Thread Direction: Right Hand
- Thread Pitch: 7 Per Inch
- Thread Size: 3/8"-7
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Width Across Corners: Max 0.650 - Min 0.628
- Wrench Size: 9/16"
- Commonly referred to as a lag screw, lag bolt, or coach screws
- Significantly larger than most other screws
- Essentially just a very large wood screw
- Feature the sharp cutting threads of a wood screw
- Commonly used in exterior applications
- Corrosion and rust resistant in harsh saltwater environments
3/8" | 316 Stainless steel lag bolts in highly corrosion resistant 316 Grade Stainless Steel feature a Hex Head and are designed to be driven with a wrench or hex driver.
Lag Screws are typically used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
Hex Lag Screws in 3/8" diameter are Partial Thread in lengths 1" and over
Product number:
6004-006-002
Skip product gallery
Flat Washers, Stainless Steel 316, 3/8" (0.406 ID x 7/8 OD x .050 THK)
From
$0.09*
Subscription
Lag Shield Expansion Anchors, Zinc Plated Steel, 3/8" x 1-3/4" (Short)
From
$0.47*
Subscription
Frequently Used With
Size:
3/8"
Size:
3/8" x 1-3/4"
