Wedge Anchors, Zinc Plated Steel, ICC-ES Approved for Cracked Concrete, 1/4"-20 x 1-3/4"
Diameter - Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.60*
|
| To 999 |
$0.53*
|
| From 1000 |
$0.45*
|
- Across Flats (Width): 7/16" (Max 0.437 - Min 0.428)
- Additional Sizing Info: Wedge Anchors
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 1/4"
- Drill (Hole) Size: 1/2"
- Drive Style: External Hex
- Head Type: No Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Grade: 5
- Head Style: No Head
- Length: 1-3/4"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Other: Listed As
- Part Number: 1092-002-0002
- Pattern: Wedge Anchor
- Product Type: Wedge Anchors
- Size: 1/4"-20 x 1-3/4"
- Size System: US
- Size Type: Regular
- Standards Met: REACH and RoHS Compliant, ICC-ES Approved for Cracked Concrete
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 0.03 lb
- Wrench Size: 7/16"
Use a 1/4 wedge anchor for cracked concrete to fasten material or equipment to cracked and uncracked concrete.
This method is especially effective in areas prone to earthquakes. 1/4 wedge anchors zinc plated ICC-ES approved anchors are designed to provide superior holding power and corrosion resistance in dry environments. AlbanyCountyFasteners.com offers a wide range of lengths to meet your specific project requirements.
- 1/4 inch diameter wedge anchors zinc plated for superior corrosion resistance in dry environments
- ICC-ES approved wedge anchor for cracked concrete and seismic applications
- 1/4-20 thread zinc plated carbon steel construction provides strength and durability
- Consists of an expansion wedge bolt, a hex nut, and a flat washer for complete installation
- Used to securely anchor equipment, structural steel, rails, and more to concrete
- Easily installed into pre-drilled holes - non-threaded end expands for a tight hold
- Nut is tightened against the washer to set the anchor in the base material
- Available in a variety of lengths to suit your project needs
- Meets strict building codes, safety standards and regulations with ICC-ES approval
- REACH and RoHS compliant - safe and environmentally friendly
1/4 inch diameter wedge anchors zinc plated are an essential fastening solution for anchoring into cracked concrete and seismic applications. These 1/4-20 thread wedge anchors are perfect for dry indoor environments. This is because they have excellent corrosion resistance thanks to the zinc plating. Made from durable carbon steel, they offer reliable strength to securely fasten structural steel, rails, mechanical equipment, and more.
Installation is simple - drill a hole into the concrete, insert the anchor and strike the non-threaded end to expand it in the hole. Then tighten the nut against the washer to set the wedge anchor firmly in place. With ICC-ES approval, you can trust these anchors meet stringent safety requirements for use in cracked and uncracked concrete.
AlbanyCountyFasteners.com stocks 1/4 inch wedge anchors in a variety of lengths including:
- 1/4 x 1-3/4 wedge anchors zinc plated for cracked concrete
- 1/4 x 2-1/4 wedge anchors zinc plated for cracked concrete
- 1/4 x 3-1/4 wedge anchors zinc plated for cracked concrete
REACH and RoHS compliance ensures these zinc plated wedge anchors are safe and environmentally friendly. For superior 1/4-20 thread wedge anchors approved for cracked concrete applications, count on AlbanyCountyFasteners.com.
Frequently Used With
