Acoustical Wedge Anchor, Zinc Plated Steel, 1/4" x 2-1/4
Anchor Bolt "Eye" Diameter: 1/4"
| Quantity | Unit price |
|---|---|
| To 99 |
$0.77*
|
| To 999 |
$0.68*
|
| From 1000 |
$0.67*
|
- Across Flats (Width): 7/16" (Max 0.437 - Min 0.428)
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 1/4"
- Drill (Hole) Size: 1/4"
- Drive Style: Internal Hex (Allen)
- Eye Inside Diameter: 1/4"
- Head Type: No Head
- Finish: Zinc Plated
- Grade: 5
- Head Style: Socket Cap
- Length: 2-1/4
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Other: Listed As
- Part Number: 2019-002-0002
- Pattern: Acoustical Wedge Anchor
- Product Type: Acoustical Anchors
- Size: 1/4" x 2-1/4"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 7/16"
- Used to anchor wiring to masonry materials such as concrete
- Installed into pre-drilled holes
- Non-threaded end is inserted into the whole then struck to expand
- The "eye" of the anchor has a 1/4" Diameter
- Corrosion resistant
- Not recommended for exterior use
A 1/4" (CR+3) Zinc plated steel Acoustical Wedge Anchor is used to secure or anchor suspended wire to masonry surfaces, typically concrete ceilings.
Product number:
2019-002-0002
