Carriage Bolts, Zinc Plated Steel, Grade A307, 5/16"-18 x 8", Partial Thread
Diameter - Thread Pitch: 5/16-18
| Quantity | Unit price |
|---|---|
| To 99 |
$0.96*
|
| To 999 |
$0.68*
|
| From 1000 |
$0.57*
|
- Color: Silver
- Condition: New
- Corner Radius on Square: 0.031"
- Corrosion Resistant: Yes
- Diameter: 5/16"
- Head Type: Dome Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Filet Radius: 0.031
- Finish: Zinc Plated
- Fit: 2A
- FT = Full Thread: No
- Grade: A307
- Head Height: Max 0.176 - Min 0.156
- Head Height Max: 0.176
- Head Diameter: Max 0.719 - Min 0.688
- Head Style: Dome
- Length: 8"
- Material: Steel
- Part Number: 722703772588
- Product Type: Carriage Bolt
- Size Type: Regular
- Square Neck Depth: Max 0.187 - Min 0.156
- Square Neck Width: Max 0.324 - Min 0.307
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"-18
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Square section grips into the part being fixed (usually wood)
- Preventing the bolt from turning when the nut is tightened
- Up to 6" of thread
- Bolts Over 6" in length will have a shoulder beneath the head
5/16"-18 Zinc plated steel carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.
REACH and RoHS Compliant
Product number:
1102-064-0222