Roofing Screws, Phillips Wafer Head, Self Driller, Zinc Plated Steel, Unpainted, #8 x 1-1/4"
Unpainted Zinc Plated Self Drilling Point Screw
| Quantity | Unit price |
|---|---|
| To 99 |
$0.13*
|
| To 999 |
$0.10*
|
| From 1000 |
$0.07*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #8
- Drive Style: Phillips
- Head Type: Wafer Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Head Style: Wafer
- Length: 1-1/4"
- Material (Duplicate): Carbon Steel
- Material: Steel
- Part Number: 3661124142280
- Pattern: Roofing Screws
- Point Type: Self Drilling
- Product Type: Roofing Screws
- Size: #8 x 1-1/4"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 8 Per Inch
- Thread Size: #8
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 0.03
#8 Zinc Plated Phillips Wafer Head Self Drilling Screw - Ideal for Metal to Metal and Metal Stud Applications
- Zinc plated finish provides corrosion resistance
- Low-profile wafer head sits flush against surface
- Self-drilling point eliminates the need for pilot holes or pre-drilling
- Phillips drive offers good torque transfer and cam-out resistance
- Easy installation with standard hand tools or power tools
- Perfect for attaching metal to metal, metal lath to metal studs, and light-gauge steel applications
The #8 zinc plated screws are perfect for fastening metal to metal and metal stud applications. The zinc plated finish ensures corrosion resistance, while the low-profile wafer head sits flush against the surface for a clean look.
The unique tip design of the self drilling point has a sharp point that can go through material. This eliminates the need of pilot holes or pre drilling. The screw's threads cut through material as it screws in the base material. These features makes installation faster and more efficient.
The wafer head is a low profile design allowing the screw to lay flush with surface of the base material. The Phillips drive makes installation easy with hand or power tools. It provides good torque transfer and resistance to cam-out.
The Phillips wafer head self drilling sheet metal screws feature zinc plating. The zinc sacrificial layer, meaning it will corrode before the base metal, thus protecting it from rust and corrosion. This will extend the screw lifespan and also approves the appearance.
These versatile #8 zinc plated Phillips drive wafer head self-drilling screws are perfect for a wide range of applications, including attaching metal to metal, securing metal lath to metal studs, and fastening light-gauge steel. Metal stud screws, also known as self-drilling screws, are reliable and easy to install fasteners for sheet metal.
Available Sizes:
- #8 x 1/2" Phillips Wafer Head Self Drilling Screw, Zinc Plated
- #8 x 3/4" Phillips Wafer Head Self Drilling Screw, Zinc Plated
- #8 x 1" Phillips Wafer Head Self Drilling Screw, Zinc Plated
- #8 x 1-1/4" Phillips Wafer Head Self Drilling Screw, Zinc Plated
We have #8 zinc plated Phillips wafer head self drilling screws available in various lengths. These screws fasten metal to metal and metal studs. These screws are easy to use and work well for fastening light-gauge steel and metal.