Sheet Metal Screws, Phillips Pan Head, Zinc Plated Steel, #6 x 7/16"
Diameter - Thread Pitch: #6-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.20*
|
| To 999 |
$0.03*
|
| From 1000 |
$0.02*
|
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: #6
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Pan Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Head Diameter: Max 0.270 - Min 0.256
- Head Style: Pan
- Length: 7/16"
- Material: Steel
- Overall Head Height: Max 0.082 - Min 0.072
- Part Number: 8200-004
- Phillips Drive: #2
- Point Type: AB
- Product Type: Sheet Metal Screws
- System of Measurement: Inch
- Thread Diameter Major: (#6) 0.141" - 0.136"
- Thread Diameter Minor: (#6) 0.102" - 0.096"
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: #6-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- #6-20
- Cut into sheet metal, plastic or wood
- Fully threaded
- Great for attaching metal to wood
- Strong retention in wood
- Also known as Self Piercing Screws or Self Tapping Screws
- Pan head - rounded top with an undercut (flat bottom) head
- Sizes listed below as: Diameter - Thread Pitch
- A zinc plated Phillips pan head sheet metal screw can be a light shiny color or have a bright blue hue
- Zinc plated steel is corrosion resistant, but it is not recommended for harsh environments
Product number:
8200-004-0092