Internally Threaded Head Strike Anchor with 3/8" Coupler, Zinc Plated Steel, 1/4" x 1-3/4"
One-piece pre-expanding anchor for concrete applications
| Quantity | Unit price |
|---|---|
| To 99 |
$1.65*
|
| To 999 |
$1.40*
|
| From 1000 |
$1.20*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: 1/4"
- Head Type: Coupler
- Thread Direction: Right Hand
- Finish: Zinc Plated
- Head Style: Internally Threaded
- Length: 1-3/4"
- Material (Duplicate): Zinc Plated Steel
- Material: Carbon Steel
- Part Number: 3661114122032
- Pattern: Strike Anchors
- Product Type: Strike Anchor
- Size: 3/8" Coupler - 1/4" x 1-3/4"
- Size System: US
- Size Type: Regular
- Smooth: yes
- System of Measurement: Inch
- Thread Size: 1/4"
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
1/4" Zinc Plated Anchor with Coupler - Great for mounting in concrete, blocks, or hard stone for a flush finish.
- 1/4" diameter zinc plated carbon steel strike anchor with internally threaded head and coupler
- Pre-formed "S"-shaped expansion design eliminates need for secondary tightenin
- Internally threaded head allows for flush-mount installation
- Zinc plated carbon steel construction provides corrosion resistance and durability
- Installs quickly into pre-drilled holes without special tools
- Ideal for anchoring in concrete, concrete block, brick, and hard stone
Technical Data | Installation Instructions
Also known as: 1/4" rod coupler crimp anchor, pound-it drive anchor, 1/4" strike anchor with threaded rod coupling
Installation Instructions:
- Drill appropriately sized hole in base material using carbide-tipped masonry drill bit
- Clean out hole of dust and debris
- Insert anchor into hole, threaded end first, until top is flush with surface
- Drive pin with hammer to set the anchor and expand the "S"-shaped working end
- Set the anchor when the pin head is flush with the top of the anchor.
- Attach threaded rod or bolt into internally threaded coupling
The 1/4" Zinc Plated Head Strike Anchor with Coupler is a single fastener. You can use it for flush-mount anchoring in solid materials such as concrete, concrete block, brick, and stone.
The anchor is made of carbon steel and has a "S"-shaped design on one end. When you drive the anchor pin, it expands and securely grips the sides of the hole. This removes the need for extra tightening steps, letting you easily install it with a hammer into a pre-drilled hole. You do not need any special setting tools.
The head has internal threads for a flush-mount application, and the coupler can attach 1/4" threaded rod, studs, or bolts. This is ideal for hanging applications like suspended ceilings, pipes, electrical fixtures and more.
The anchor is zinc plated for corrosion resistance and added durability. The carbon steel construction provides excellent strength and reliable holding power in concrete and masonry.
Available sizes:
- 1/4" x 1-1/4"
- 1/4" x 1-3/4"
Use the 1/4" Zinc Plated Internally Threaded Head Strike Anchor for secure flush-mount anchoring with a threaded rod coupler. This anchor is quick and safe to use. It is designed for easy installation.
Trust this anchor for reliable anchoring. This anchor is easy to install and provides a strong hold in different types of masonry materials.