Machine Screws, Slotted Flat Head, Brass, 1/4"-20 x 3/8"
Diameter - Thread Pitch: 1/4"-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.55*
|
| To 999 |
$0.36*
|
| From 1000 |
$0.34*
|
- ANSI: B1.1
- Color: Yellow
- Color May Vary: Color and sheen may vary
- Condition: New
- Corrosion Resistant: Yes
- Countersink: 82 Degree
- Diameter: 1/4"
- Drive Style: Slotted
- Head Type: Flat Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Head Diameter: Max 0.507 - Min 0.452
- Head Style: Flat
- Length: 3/8"
- Material: Brass
- Overall Head Height: Max 0.153 - Min 0.131 (From Bottom of Countersink to Top of Head)
- Part Number: 710500896927
- Product Type: Machine Screws
- Size System: US
- Size Type: Regular
- Standards Met: ASME, ANSI B1.1
- System of Measurement: Inch
- Thread Diameter: (1/4") Max 0.2489 - Min 0.2408
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- ASME Standards specific
- A machine screw is commonly identified by its small size
- Installed with a flat head or slotted screwdriver/bit
- Countersunk head that runs flush with the application surface
- Brass is very corrosion resistant but also a very soft material
- Conducts electricity and heat
- Commonly used for:
- Plumbing
- Carpentry
- Weather Stripping
- Trim
- Radiators
- Musical Instruments
1/4"-20 slotted flat head machine screws in corrosion resistant brass.
NOTE: Color and sheen may vary
Product number:
1013-10010-0002