Machine Screws, Slotted Hex Washer Head, Type F Thread Cutting, Zinc Plated Steel, #10-32 x 1/2"
Diameter - Thread Pitch: #10-32
| Quantity | Unit price |
|---|---|
| To 99 |
$0.15*
|
| To 999 |
$0.08*
|
| From 1000 |
$0.06*
|
- Across Flats (Width): 5/16" (Max 0.312 - Min 0.309)
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: External Hex / Slotted
- Elongation: 30%
- Head Type: Hex Washer Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Finish: Zinc Plated
- Head Style: Hex Washer
- Length: 1/2"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Overall Head Height: Max 0.120 - Min 0.105
- Part Number: 720572176384
- Point Type: F
- Product Type: Thread Cutting Screws
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Diameter: (#10) Max 0.1900 - Min 0.1818
- Thread Direction: Right Hand
- Thread Pitch: 32 Per Inch
- Thread Size: #10-32
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Washer OD: Max 0.414 - Min 0.384
- Washer Thickness: Max 0.031 - Min 0.019
- Weight: 1 lb
- Wrench Size: 5/16"
#10-32 Zinc plated thread cutting screws feature a thread cutting tip which makes threads in existing or pre-drilled holes.
Drill Bit Sizes for Thread Cutting Screws
- Feature a machine screw style thread
- Blunt tapered point with multi-cutting edges
- Hexagonal head with a slotted drive and washer built into the head
- Applied with a wrench of a slotted or flat screwdriver
- Chip cavities
Sizes Listed As:
Diameter - Thread Pitch x Length from Underside of Head
Product number:
6000-008-0012
Skip product gallery
Norseman Magnum Super Premium Jobber Length Drill Bits, 11/64"
From
$1.83*
Subscription
Frequently Used With
Size:
11/64"