Hex Tap Bolts, Silicon Bronze, 5/16"-18 x 1/2", Full Thread
Diameter - Thread Pitch: 5/16"-18
| Quantity | Unit price |
|---|---|
| To 99 |
$1.19*
|
| To 999 |
$0.79*
|
| From 1000 |
$0.73*
|
- Across Flats (Width): 1/2" (Max 0.500 - Min 0.489)
- Color: Bronze
- Color May Vary: Color and sheen may vary
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/16"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- FT = Full Thread: Yes
- Head Height: Max 0.211 - Min 0.195
- Head Height Basic: 13/64"
- Head Height Max: 0.211
- Head Style: Hex
- Length: 1/2"
- Marine Grade: Yes
- Material: Silicon Bronze
- Part Number: 720572162059
- Product Type: Hex Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"-18
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 1/2"
- 5/16"-18
- Alloy 651 Silicon Bronze
- Tap bolts are fully threaded from the point to the underside of the hex head
- Also referred to as a hex bolt
- Hexagonal head designed to be driven by wrench or socket
- Silicon bronze tap bolts are commonly used for their look as a finishing bolt
- Superior corrosion resistance to 316 stainless steel
- Commonly used for:
- Plumbing
- Electrical
- Power Plants
- NOTE: Color and sheen may vary
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
Note: All Silicon Bronze products will develop a patina based on the environment and time. These fasteners are not coated with any sealants to prevent a patina from forming. Depending on when the product was manufactured, you may receive a product that has started to develop a patina.
Frequently Used With
