Drop In Masonry Anchors with Setting Tool, Zinc Plated Steel, 3/4"-10 QTY 25
Drop-In Female Anchors with Setting Tools for Concrete and Stone Applications
$72.44*
- Color: Silver
- Diameter: 3/4"
- Finish: Zinc Plated
- Material: Steel
- Product Type: Drop In Masonry Anchors with Setting Tools
- System of Measurement: Inch
- Thread Pitch: 10 Per Inch
- Thread Size: 3/4"-10
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- CR+3 Zinc plated steel for durability and corrosion resistance
- Used in flush-mount applications in solid base materials
- Matching setting tool included in each pack
A Drop In anchor is a female (internal) threaded concrete anchor, often installed overhead that runs flush with the surface of concrete or stone. To install a Drop In Anchor in a drilled hole properly, anchor is installed into the hole in the masonry material, the set tool is then placed in the middle of the threaded portion and struck with a hammer to ensure that the anchor has set correctly.
Sizes Below Listed as: Thread Diameter - Thread Pitch (number of Anchors in Bundle)
| Thread Diameter: | Drop-In Anchor Length: | Drill (Hole) Size: | Internal Threaded Length: |
| 1/4" | 1" | 3/8" | 1/2" |
| 3/8" | 1-9/16" | 1/2" | 13/16" |
| 1/2" | 2" | 5/8" | 1-1/4" |
| 5/8" | 2-1/2" | 7/8" | 2" |
| 3/4" | 3-1/8" | 1" | 2" |
Product number:
1040-008-042
Skip product gallery
Drop-In Anchors, Zinc Plated Steel, 3/4"-10 x 3-1/8"
From
$2.01*
Subscription
Frequently Used With
Drop in anchor length:
3/4"-10