Join Our Newsletter
Receive the latest news on new promotions,
exclusive offers, and new arrivals.
Hex nuts, or hex finish nuts, are the most common type of finish nut used. The hexagonal shape makes these nuts easy to grasp with a wrench or pliers. These nuts are often used with screws and bolts when mechanically joining materials together. They are installed on the opposite side of the materials being fastened. With the bolt head or machine screw head on the other side, they compress the materials together for a secure fit.
Zinc is by far the most common and economical type of plating for fasteners. The zinc plating adds a protective "sacrificial" top layer against corrosion while also adding a shiny finish to the threaded rod. Zinc plated threaded rod is ideal for indoor use where it won't be constantly exposed to harsh elements.
Hex nuts are hexagonal blocks of material, typically metal, with a hole punched through that is threaded. Hex nuts, or hex finish nuts, are the most common type of finish nut used. The hexagonal shape makes these nuts easy to grasp with a wrench or pliers. These nuts are often used with screws and bolts when mechanically joining materials together.
Hex nuts are used alongside machine threaded fasteners to complete a secure assembly. The head of the screw or bolt clamps down on the material while the nut clamps down on the opposite side. This effectively "sandwiches" the assembly securely together.
Hex nuts work jointly with machine threaded fasteners such as bolts, anchors, and machine screws to effectively clamp down on both sides of the fastened material. The bolt and nut threading causes friction against each other, allowing a secure fit for general applications. A lock nut is used instead if the application would be subject to high amounts of vibration.
Zinc plated steel is steel that goes through adding a layer or coating of zinc to protect the steel from corrosion. The added layer of zinc sacrifices itself to keep the steel from rusting, even if the plating is damaged.
Zinc plating is not a good form of corrosive protection for outdoor use, especially near saltwater or in marine environments. For those applications, stainless steel or potentially hot-dip galvanized steel would work better. Zinc-plated steel is better for indoor use.
Receive the latest news on new promotions,
exclusive offers, and new arrivals.
Copyright © 2023 Albany County Fasteners.
A Division of RAW Products Corp.
By using this site you agree to the terms and conditions.