Heat Shrink Tubing
Select a Category Below for More Details
Heat Shrink Tubing
Dual Wall Heat Shrink Polyolefin Tubing for Exposed Wire & Repair
- A flexible alternative to heavy wall tubing for light duty applications
- Provides environmental and flame retardant protection for electrical and electronic connections
- Ideal for a variety of applications including automotive, truck and marine harnesses
- Polyolefin Material
Heat Shrink tubing in this selection is flexible and adhesive lined for versatility and easy application. Dual Wall Tubing provides a water-tight and gas-tight seal for connectors and splices keeping your wires safe and insulated. Heat Shrink Tubing in this selection is available in red or black for color coding, and in 6 inch lengths. All dual wall heat shrink features an AMS-DTL-23053/4 Class 3 MIL-SPEC.
Complete Specifications:
- Material: Polyolefin
- Shrink Ratio: 3:1
- MIL SPEC.: MIL-DTL-23053/4,Class 3
- Continuous Operating Temperature: -55°C to 110°C (-67°F to 230°F)
- Minimum Shrink Temperature: 120°C (240°F)
- Tensile Strength: 2,200 psi
- Heat Shock (No Cracking or Flowing): 4 Hours at 250°C (482°F)
- Elongation: 400%
- Low Temp Flexibility (No Cracking): 4 Hours at -55°C (-67°F)
- Longitudal Change: 1% - 15%
- Flame Retardant: Jacket
- Dielectric Strength: 600V/Mil
- Volume Resistivity: 10E16 ohm-cm
- Corrosion Resistance: Non-Corrosive
- Fungus Resistance: No Growth
- Fluid Resistance: Excellent