Wedge Anchor 7/8"-9 Zinc

7/8"-9 Zinc Plated Wedge Anchors

Diameter - Pitch: 7/8"-9


7/8"-9 (Grade 5) Zinc plated steel Wedge Anchors are used to secure or anchor materials and equipment to masonry surfaces.

  • Used to anchor equipment to masonry materials such as concrete
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The nut is then tightened against the washer to the installation material
  • Corrosion resistant
  • Not recommended for exterior use
REACH and RoHS Compliant

Select Products Below
Product Specifications
Additional Sizing Info
Wedge Anchors
Body Diameter
7/8", Max 0.875 - Min 0.865
Color
Silver
Finish
Zinc Plated
Includes Nuts & Washers
Yes
Intended Work Material
Concrete & Masonry Materials
Masonry Drill Bit Size
7/8"
Material
Zinc Plated Grade 5 Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Plating
Zinc
Product Type
Wedge Anchors
Standards Met
REACH and RoHS Compliant
Thread Direction
Right Hand
Thread Pitch (Count)
9 Per Inch (Coarse)
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
1-5/16"
Select Products Below
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...