1"-8 Zinc Plated Wedge Anchors

1"-8 Zinc Plated Steel Wedge Anchors

Diameter - Pitch: 1"-8


  • Used to anchor equipment to masonry materials such as concrete
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The nut is then tightened against the washer to the installation material
  • Corrosion resistant
  • Not recommended for exterior use

A 1"-8 (Grade 5) Zinc plated steel Wedge Anchor, also sometimes called an anchor bolt or expansion wedge, is used to secure or anchor materials and equipment to masonry surfaces. Anchor bolts consist of an expansion wedge bolt, a hex nut, and a flat washer.
REACH and RoHS Compliant

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Wedge Anchor Zinc - 1"-8 x 6"
SKU #1080-014-0002
Wedge Anchor Zinc - 1"-8 x 6"
SKU #1080-014-0002
1
$12.05 (12.05/ea)
25
$293.75 (11.75/ea)
100
$1,000.00 (10/ea)
1000
$9,030.00 (9.03/ea)
Subtotal: $0.00 /
Wedge Anchor Zinc - 1"-8 x 12"
SKU #1080-014-0022
Wedge Anchor Zinc - 1"-8 x 12"
SKU #1080-014-0022
1
$17.58 (17.58/ea)
25
$177.00 (7.08/ea)
100
$1,650.00 (16.5/ea)
1000
$13,180.00 (13.18/ea)
Subtotal: $0.00 /
Wedge Anchor Zinc - 1"-8 x 15"
SKU #1080-014-0032
Wedge Anchor Zinc - 1"-8 x 15"
SKU #1080-014-0032
1
$24.32 (24.32/ea)
25
$593.75 (23.75/ea)
100
$2,145.00 (21.45/ea)
1000
$18,240.00 (18.24/ea)
Subtotal: $0.00 /




Product Specifications
Additional Sizing Info
Wedge Anchors
Color
Silver
Drill (Hole) Size
1"
Drive Style
External Hex
Finish
Zinc Plated
Grade
5
Head Style
No Head
Material
Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Product Type
Wedge Anchors
Standards Met
REACH and RoHS Compliant
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
8 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
1-1/2"