1/4"-20 Stainless Steel Wedge Anchors

1/4"-20 Stainless Steel Wedge Anchors

Diameter - Pitch: 1/4"-20


  • Corrosion Resistant in fresh or rainwater applications
  • Used to secure equipment to masonry surfaces
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The nut is then tightened against the washer to the installation material
  • Commonly used for:
    • Generators
    • Motors
    • Pumps
    • Pipes

A 1/4"-20 Stainless Steel Concrete Masonry Wedge Anchor, also sometimes called an anchor bolt or expansion wedge, is used to anchor and secure material and equipment to concrete masonry surfaces. Anchor bolts consist of an expansion wedge bolt, a hex nut, and a flat washer.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 1-3/4"
SKU #1035-10000-0001
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 1-3/4"
SKU #1035-10000-0001
1
$0.96 (0.96/ea)
10
$8.00 (0.8/ea)
100
$75.00 (0.75/ea)
1000
$720.00 (0.72/ea)
Subtotal: $0.00 /
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 2-1/4"
SKU #1035-10000-0014
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 2-1/4"
SKU #1035-10000-0014
1
$1.13 (1.13/ea)
10
$9.50 (0.95/ea)
100
$90.00 (0.9/ea)
1000
$850.00 (0.85/ea)
Subtotal: $0.00 /
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 3-1/4"
SKU #1035-10000-0026
Wedge Anchor 304 Stainless Steel - 1/4"-20 x 3-1/4"
SKU #1035-10000-0026
1
$1.31 (1.31/ea)
10
$10.50 (1.05/ea)
100
$101.00 (1.01/ea)
1000
$980.00 (0.98/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Drill (Hole) Size
1/4"
Drive Style
Internal Hex (Allen)
Grade
304
Head Style
Socket Cap
Material
Stainless Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Product Type
Wedge Anchors
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
20 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
7/16"