You are here: Home > Forged Lifting Hardware > Turnbuckles > Turnbuckle Assembly - Stub & Stub

Turnbuckle Assembly - Stub and Stub - 316 Stainless Steel

Turnbuckle Assembly - Stub and Stub - Carbon Steel

Turnbuckle Assembly - Stub and Stub - Hot Dipped Galvanized Steel

Stainless Steel Turnbuckle

Turnbuckle Assemblies

Stub and Stub Forged Turnbuckles

Forged Turnbuckle Assemblies, also known as stretching screws or bottle screws, are devices used to adjust the tension or length of ropes, cables, tie rods, and other tensioning systems. Turnbuckles in this selection consist of an open frame or body and two stub end fittings. One end of a turnbuckle's core is left hand threaded and the other end is right hand threaded allowing precise adjustment of the tension and length to be permitted by simply rotating the turnbuckle frame itself, without twisting the turnbuckle fittings or the ropes, wires, or cables they are attached to.

Turnbuckle assemblies with stub end fittings from Albany County Fasteners are Drop Forged, Passivated and Electropolished for a durable corrosion resistant finish. Forged Turnbuckles are available in carbon steel, hot dipped galvanized steel, and 316 stainless steel.

Turnbuckles should only be applied in a straight, in-line manner only. Keep in mind that the larger the thread diameter of the end fitting, the more load capacity the turnbuckle will have. The longer the length of the turnbuckle body, the more slack it can take when tightening or loosening the turnbuckle.

Proudly Manufactured in the USA - Domestic