You are here: Home > Forged Lifting Hardware > Turnbuckles > Turnbuckle Assembly - Eye & Eye

1582-002
Turnbuckle Assembly - Eye and Eye - 316 Stainless Steel

1582-004
Turnbuckle Assembly - Eye and Eye - Carbon Steel

1582-006
Turnbuckle Assembly - Eye and Eye - Hot Dipped Galvanized


Stainless Steel Turnbuckle

Turnbuckle Assemblies

Eye and Eye Forged Turnbuckles

Forged Turnbuckle Assemblies, also known as stretching screws or bottle screws, are devices used to adjust the tension or length of ropes, cables, tie rods, and other tensioning systems. Turnbuckles in this selection consist of an open frame or body and two eye bolt end fittings. One end of a turnbuckle's core is left hand threaded and the other end is right hand threaded allowing precise adjustment of the tension and length to be permitted by simply rotating the turnbuckle frame itself, without twisting the turnbuckle fittings or the ropes, wires, or cables they are attached to.

Turnbuckle assemblies with eye and eye end fittings from Albany County Fasteners are Drop Forged, Passivated and Electropolished for a durable corrosion resistant finish. Forged Turnbuckles are available in carbon steel, hot dipped galvanized steel, and 316 stainless steel.

Turnbuckles should only be applied in a straight, in-line manner only. Keep in mind that the larger the thread diameter of the end fitting, the more load capacity the turnbuckle will have. The longer the length of the turnbuckle body, the more slack it can take when tightening or loosening the turnbuckle.


Proudly Manufactured in the USA - Domestic