You are here: Home > Machine Screws Metric > Torx Pan Head Machine Screw Metric

1099-002
M2 x .4 Torx Pan Head Machine Screw Metric A2 SS

1099-004
M3 x .5 Torx Pan Head Machine Screw Metric A2 SS

1099-006
M4 x .7 Torx Pan Head Machine Screw Metric A2 SS

1099-008
M5 x .8 Torx Pan Head Machine Screw Metric A2 SS

1099-010
M6 x 1.0 Torx Pan Head Machine Screw Metric A2 SS

1099-012
M8 x 1.25 Torx Pan Head Machine Screw Metric A2 SS


Metric Torx Screws

Stainless Steel Metric Torx Pan Head Machine Screws

A2 Stainless Steel Metric Machine Screws with a Torx 6 Lobe Drive

Torx 6 Lobe Pan Head Machine Screws in this selection are in Metric Sizes. Select a Diameter and Thread Pitch from the list of products above.

A2 Stainless Steel Torx is one such pattern that has become very widespread. The main cause of this trend is manufacturing efficiency: Torx and other types are designed so the driver will not slip out of the fastener as will a Phillips drive, since the driver is not inherently centered on the fastener.) A benefit/disadvantage of non-typical fasteners (depending on your point of view) is that it can be more difficult for users of a device to disassemble it than if more-common head types were used, but Torx and other drivers are widely available. Torx Drives are also known as 6 Lobe and Hexalobular Drives.

A2 Stainless Steel is the Industry Standard for Metric Stainless Steel Fasteners.