5/8" Zinc Sleeve Anchors

5/8" Zinc Sleeve Anchors

Diameter: 5/8"


  • Used for hollow concrete masonry units
  • Made up of a threaded stud and an outwardly flared cone-shaped end with a nut and washer
  • Inserted into pre-drilled holes then expanded for a secure fit
  • Zinc plating encases plain steel alloy and provides a layer of corrosion resistance

A 5/8" Zinc plated steel concrete masonry sleeve anchor is used to secure material and equipment to masonry surfaces.
REACH and RoHS Compliant

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Sleeve Anchor Zinc - 5/8" x 2-1/4"
SKU #1082-008-0001
Sleeve Anchor Zinc - 5/8" x 2-1/4"
SKU #1082-008-0001
1
$2.53 (2.53/ea)
25
$60.75 (2.43/ea)
100
$233.00 (2.33/ea)
1000
$2,300.00 (2.3/ea)
Subtotal: $0.00 /
Sleeve Anchor Zinc - 5/8" x 3"
SKU #1082-008-0002
Sleeve Anchor Zinc - 5/8" x 3"
SKU #1082-008-0002
1
$2.20 (2.2/ea)
25
$53.00 (2.12/ea)
100
$202.00 (2.02/ea)
1000
$2,010.00 (2.01/ea)
Subtotal: $0.00 /
Sleeve Anchor Zinc - 5/8" x 4-1/4"
SKU #1082-008-0012
Sleeve Anchor Zinc - 5/8" x 4-1/4"
SKU #1082-008-0012
1
$3.99 (3.99/ea)
25
$92.75 (3.71/ea)
100
$343.00 (3.43/ea)
1000
$3,140.00 (3.14/ea)
Subtotal: $0.00 /
Sleeve Anchor Zinc - 5/8" x 6"
SKU #1082-008-0032
Sleeve Anchor Zinc - 5/8" x 6"
SKU #1082-008-0032
1
$4.12 (4.12/ea)
25
$98.75 (3.95/ea)
100
$378.00 (3.78/ea)
1000
$3,770.00 (3.77/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Drill (Hole) Size
5/8"
Drive Style
External Hex
Finish
Zinc Plated
Head Style
No Head
Material
Steel
Product Type
Sleeve Anchor
Standards Met
REACH and RoHS Compliant
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
11 Per Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Washer Thickness
0.095
Wrench Size
15/16"