You are here: Home > Anchors & Masonry Bolts > Sammys Threaded Rod Hanger Anchors > Sammys Rod Hanger Drywall Anchors

3804-002
Sammys Drywall Anchors for Vertical Hollow Wall Applications


Sammys Rod Hanger Drywall Anchors - Toggle Bolts

Drywall Rod Hanger Anchors

Hanging Threaded Rod from Drywall or Prestressed Concrete

Sammys Drywall Rod Hanger Anchors are used in the installation of threaded rod. These anchors install vertically into the underside of drywall or prestressed concrete (hollow core) structures to hang the threaded rod which can, in turn, support industrial equipment, steel columns, sprinklers, and many other structural assemblies. Drywall anchors are also known as toggle bolts and hollow wall anchors; they gain increased holding power from their toggle wings.

Sammys Drywall anchors will require a predrilled 5/8" pilot hole for installation.


Please do not install Sammys drywall anchors while the drill is in impact mode; doing so will destroy the pullout factor of the fastener.

We recommend using Sammys Nut Drivers to install Sammys rod hangers. They are designed with a unique spin-off feature to provide fast and safe installation. Sammys warranty will only apply if the Sammys nut driver is used for installations.


For information on the Warranty for Sammys products, please visit the ITW Buildex website.

USA Made Rod Hangers

USA MADE FASTENER