You are here: Home > Rivets > POP Rivets Countersunk Flat Open End > Aluminum

1816-002
1/8" (#4 C) POP Rivet Countersunk 120 Degrees Aluminum

1816-004
5/32" (#5 C) POP Rivet Countersunk 120 Degrees Aluminum

1816-006
3/16" (#6 C) POP Rivet Countersunk 120 Degrees Aluminum


Aluminum Countersunk Pop Rivets

Countersunk POP Rivets

Aluminum Blind Rivets

Countersunk POP Rivets, also known as Flat Rivets, are used to connect two pieces of material in quick, efficient way. The hat of the rivet is almost inverted, with a 120 degree countersink in the integrated washer. A countersunk rivet is used in countersunk holes and once set, finish flush to the surface.

Countersunk POP Rivets, also called Blind Rivets, are tubular, comprised of a hat and mandrel; the length of the mandrel is snapped off when installed. Both the hat and mandrel are made of lightweight aluminum.

Aluminum Countersunk open end blind rivets are made from genuine fine-grade materials to insure consistent error free application from rivet to rivet. A special treatment applied to the rivet insures the mandrel will be encased by the rivet during application.

Aluminum is a common material that is very soft and lightweight. Aluminum alloy may be comprised of several materials including iron, manganese, silicon, copper, zinc and silicon. Aluminum rivets are among the most common aluminum fasteners. Aluminum should never be used with Stainless Steel, corrosion may occur.